人的 梦想,是不会结束的 ---- 马歇尔·D·帝奇
Windows 8 缺少计算机所需的介质驱动程序 错误
适用软件:Windows 7/8/8.1 安装。 USB Installation Error
出现如下的错误: 缺少计算机所需的介质驱动程序 (A media driver your computer needs is missing. This could be a DVD, USB, or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now)
这个错误通常出现在USB 安装盘的情况下。原因是因为没有使用 Windows 自己的分区软件分区。而第一个分区的 Offset 不是 1024kb。(This is due to the usb drive partition was created by a non-windows partition software. And the offset of that partition is not 1024kb. You can check it following the steps in CMD command)
可以做如下的检查:
开始菜单-〉CMD->以管理员身份运行。
Diskpart
list disk
select disk <x> (U 盘)
list Part
红圈中的数字必须是 1024kb,如果不是。就只能用Diskpart 删除分区然后重新建立,重新格式化。
(the number is the red circle must be 1024kb. If it is not, you will need to delete all your files and the partition and then recreate it)
Warning! You will lose all your files in that drive!
Diskpart
list disk
select disk <x>
clean
Create partition primary
select partition 1
format fs=fat32 quick (or ntfs if you want)
assign
然后再检查
list part
保证 offset 变成 1024kb 就可以了
Windows Network Printer Offline
The following step solve the problem
1. Double click the offline printer to bring up the print queue
2. Select printer from the menu tab- Once you select the printer you will notice that offline function is checked. Click on it an the printer goes back online.
3. Print a test page to see if the issue is resolved.
Windows Phone 7 作为 USB Drive
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB
(and not the other ControlSet01 or 02 if you have them) and then search for ZuneDriver
- Change ShowInShell from 0 to 1 <- this enable Windows Explorer to show the device when pluged in
- Change PortableDeviceNameSpaceExcludeFromShell from 1 to 0
- Change EnableLegacySupport from 0 to 1 <- this enables Windows Explorer to detect the device
- Change EnableDefaultAutoPlaySupport from 0 to 1
This method is from MobileTechWorld
http://www.mobiletechworld.com/2010/11/18/use-your-windows-phone-7-device-as-a-portable-usb-drive/
Windows Phone 7 无法连接Zune
Zune无法连接到windows phone 7 的解决方法:
这是Zune个人数字证书的问题,重建证书的方法有两个。
1.
关闭Zune,断开手机连接。
按下Winkey +R,输入 certmgr.msc,回车,打开证书管理器。
在左侧窗格,展开个人-证书
在右侧窗格,找到类似这样的条目 "zune-tuner://windowsphone/...".
删除它,然后退出证书管理器
启动Zune,然后连接你的手机,它会创建一个新的证书。然后就ok了。
2.
同样是先关闭zune,然后断开手机连接。
按住Winkey +R,输入explorer,打开资源管理器。找到如下目录:C:\Users\<UserName>\AppData\Roaming\Microsoft\Crypto\RSA
在右边窗格,应该可以看到类似这样的目录S-1-5-21-1234567890-1234567890-1234567890-1111
将这个目录重命名,添加一个 .bak的后缀。然后关闭资源管理器。
启动zune,连接你的手机。哈哈,zune证书终于创建成功了。mozart成功恢复了连接。
本文出自 “活动目录SEO” 博客,出处 http://gnaw0725.blog.51cto.com/156601/638849
Windows 7 对等网络分组服务无法启动的解决
遇到对等网络分组服务无法启动的问题,出现1068 错误。"Cannot start Peer Networking Grouping - Error: 1068"
解决方法:
到目录:
C:\windows\serviceProfiles\LocalService\AppData\Roaming\PeerNetworking
删除文件:idstore.sst
然后启动服务,或者重启即可。
Windows 7 Path 环境变量
如果你不小心丢失了 Windows 7 的 Path 默认环境变量。你可以用以下的方法恢复:
1. 右键我的电脑。
2. 属性
3. 选左边的高级系统设置
4. 进入环境变量设置
5. 找到 Path,加入下面的字符:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;
6. 保存退出。
Windows 7 通知区域系统图标的更改
Windows 通知区域的程序图标可以自定义显示还是不显示,这点很多人都知道。不过忽略了系统图标也同样可以控制。
方法是点通知区域的向上的小三角,打开自定义,然后看这页的最下方,可以选者打开或者关闭系统图标。这也包括讨厌的“操作中心图标”。
不过如果不能选择,那就需要用系统策略编辑来更改。
Ultimate 和 Professional 版可以通过 Gpedit.msc 来更改。其他版本Starter, Home Basic, Home Premium 则需要自己写注册表。
Windows 7 只有部分内存可用的解决
最近遇到一个很奇怪的问题,Windows 报告有12GB内存,但是标明只有6GB可用。
解决方法,运行 msconfig.exe,打开引导页,然后进入高级选项,把"最大内存"前的勾去掉。重启。
删除Linux后 Windows 7 无法启动的解决
卸载Ubuntu 以后, Windows 7 无法启动,直接Grub 出错。最后按照下面的方法修复。
1. 用 Windows 7 安装盘启动。
2. 在开始安装界面选择“修复Windows系统”
3. 然后选择进入命令行
4. 输入: Bootrec /fixmbr /fixboot
5. 重新启动。
如果提示Bootrec文件找不到,可以去 Windows\system32下找到。
Windows 7 桌面背景无法设置的解决
最近突然发现Windows 7 桌面背景无法设置。其现象是在个性化里面,无论选择什么,桌面都不变,只有选择纯色有用。后来想到不久前用过一个叫 Starter Wallpaper Changer 的软件。可能是被修改了设置。于是重新打开 Starter Wallpaper Changer,点"Restore", 出现 "permission restored"。然后重启,出现Windows 重新配置字样。问题解决。
下载:StarterWallpaperChanger.zip
Windows 7 简易版改桌面软件
Windows 7 简易版的桌面预设是无法改变的。这个小工具可以用来改变简易版的桌面。
下载: StarterWallpaperChanger.zip
如果使用了这个小工具会有后遗症。以后即使升级到高级的版本,也无法更改桌面。解决方法请看 Windows 7 桌面背景无法设置的解决。
变色龙 Chameloen 自动启动小技巧
适用版本:变色龙 Chameleon 2.0 RC1
变色龙Windows 版安装以后,始终要在Windows 和 Chameleon 之间选择一次才能进入变色龙的引导界面。下面这个简单的办法可以自动进入引导界面。需要的是另外一个分区。不需要修改 MBR。
假设 Windows 安装在C: ,另外有一个无操作系统的数据盘D:。那么需要做的就是把D: 设为活动盘,然后再D: 根目录放入Windows Xp 的启动文件(包含下载附件),变色龙文件(avldr avldr.bin wowpc.iso),以及 windows\system32\hal.dll 文件。
然后把变色龙的文件Wowpc.iso复制到C: (如果有隐藏分区在第一个,则需要把文件wowpc.iso,复制到第一个分区。)
再修改boot.ini为:
[boot loader]
timeout=10
default=D:\Avldr.bin
[operating systems]
D:\Avldr.bin="Chemeleon"
下载:ChameleonEx.zip
PSP 神卡驱动
这个是所谓的PSP神卡 EDup Wifi Link 驱动,比较难找的。
驱动不支持X64 系统和 Windows 7。不过可以安装在虚拟机(Xp mode 或者 VMWare)里使用。
下载:Edup_Wifi_Link_Driver.zip
Windows 7 Esata HotPlug
ESata 是支持 Hot Plug 的。
1. Bios 设置硬盘控制器为ACHI 或者 Raid 模式
2. 安装相应的Intel 或者 NV 硬盘驱动
3. 如果任然不能 Hot Plug 则需要修改注册表
HKEY_LOCAL_MACHINE System
CurrentControlSet
Services
Msahci
把 项Start 的值改为 0
Windows 7, 8, 10 安装盘出现OEM协议
Windows 7 OEM安装盘制作的介绍很多,但是大多数制作出来的OEM安装盘虽然号称有OEM协议,但是却从来不出现。
经过仔细研究,笔者找到了解决方法。
大部分步骤和网上制作一般OEM安装盘一样,这里只说重点。
首先,要保证你的OEM资料有以下文件
$OEM$\$$\Panther\unattend.xml
$OEM$\$$\system32\oobe\info\EULA_cns_CN_1.00.rtf
$OEM$\$$\system32\oobe\info\oobe.xml
$OEM$\$$\system32\oobe\info\resources\usertile.bmp
$OEM$\$$\system32\oobe\info\resources\WelcomeLogo.png
$OEM$\$$\system32\oobe\info\Backgrounds\backgroundDefault.jpg
其他地方下载的OEM包,都应该包含这些文件。然后需要确认unattend.xml包含以下的字段:
<settings pass="auditSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Display>
<DPI>96</DPI>
</Display>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Reseal>
<Mode>Audit</Mode>
</Reseal>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Display>
<DPI>96</DPI>
</Display>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Reseal>
<Mode>Audit</Mode>
</Reseal>
</component>
</settings>
<settings pass="auditUser">
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Reseal>
<Mode>OOBE</Mode>
</Reseal>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Reseal>
<Mode>OOBE</Mode>
</Reseal>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:k:/sources/install.wim#Windows 7" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
以及oobe.xml 包含以下字段:
<HideEULAPage>false</HideEULAPage>
<name>VAIO</name>
<logopath>c:\Windows\System32\oobe\info\resources\WelcomeLogo.png</logopath>
<eulafilename>EULA_cns_CN_1.00.rtf</eulafilename>
<OutOfBoxBackground>True</OutOfBoxBackground>
<usertilepath>c:\Windows\System32\oobe\info\resources\usertile.bmp</usertilepath>
然后下面是操作步骤:
1. 使用原版的安装盘正常安装Windows。一定不要用别人制作的OEM盘来安装,否则unattend.xml 会起冲突。
2. 第一次进入Windows系统以后,在搜索...里输入 service,然后再出现程序里选择“打开本地服务”。在服务里禁用"Windows Media Player Networking Sharing"。此步骤的目的是防止后面的sysprep出错。
3. 打开命令提示符CMD,运行:\windows\system32\sysprep\sysprep /audit /reboot
4. 系统会自动重新启动
5. 重新进入系统以后,弹出的对话框先不管他,直接关闭。首先按照第2步,关闭"Windows Media Player Networking Sharing"。
6. 进入控制面板->用户控制,删除除了"Administrator"和"User"以外的所有用户。
7. 运行磁盘清理,去除不必要文件
8. 打开命令提示符CMD,运行:\windows\system32\sysprep\sysprep /audit /generalize /shutdown。
9. 几分钟,Windows 会自动关机。这样一个Windows 安装系统就做好准备了。
10. 进入Windows PE系统,或者进入其他Windows 系统。一定不要打开前面做好的系统
11. 删除 windows\inf\*.pnf
12. 删除 windows\winsxs\backup\*.*。这一步需要取得权限。方法是先选属性->安全->高级,选择"Owner" 为"Administrator" 到目录和子目录。关闭属性。然后再打开属性->安全,设置Administrator的权限为全部操作。
13. 最后用 imagex 捕捉为 wim 文件即可。
imagex /compress maximum /flags "YourEdition" /check /scroll /capture "your system path" "destation path" "name"
Windows 7, 8, 10 安装盘出现OEM协议
For Windows 7 clean install:
Please install the following:
1. Graphics Driver.
Note: For models equipped with NVIDIA graphics card, please skip this.
2. Audio Driver
3. Audio HDMI Driver
4. Wireless LAN Driver
5. Ethernet Driver
6. Bluetooth Driver
Note: After executing the installer, please manually install the setup.exe in C:\Upgrade\Drivers\Broadcom
7. TPM Infineon
8. SD Card Driver
9 Memory Stick Driver
10. CF Card Driver (only applicable to models with CF Card slot)
11. Fingerprint Driver (only applicable to models with Fingerprint Sensor)
12. Protect Suite QL (only applicable to models with Fingerprint Sensor)
13. Sony Programmable Input/Output Controller (SPIC) Driver
14. Sony Firmware Extension Parser (SFEP Driver)
15. Sony Shared Library
16. Setting Utility Series
17. VAIO Event Service
18. VAIO Control Center
19. Battery Checker
20. VAIO Launcher
21. VAIO Mode Switch (for VGN-SR models only)
22. VAIO Power Management
23. VAIO Location Utility
24. VAIO Update
25. VAIO Smart Network
http://www.sony.com.au/support/download/365363/product/vgn-z48gd/sectionfirst?subpage=detail
Windows 无法完成配置
在封装OEM系统并且执行 sysprep /generalize 之后出现
错误 - "windows无法完成系统配置,若要恢复配置,请重新启动计算机"
这个错误的原因是由于安装的OEM的驱动不完整造成。要避免这个错误需要在封装之前安装微软的 Hotfix。目前只有64位的
http://support.microsoft.com/kb/981542/
64位Hotfix 下载
否则请参考下面的方法脱机加入Hotfix
如果是Wim镜像,请参考 1
如果已经是机器上的系统,请参考 2
1. 向脱机镜像加入补丁。
具体方法如下:
a. 先用Dism 解压脱机镜像。
b. 找到 Dism.exe 文件,一般应该在 \windows\system32。
c. 尝试运行 dism,如果出现dismcore.dll 错误,就将dism.exe 复制到 \windows\system32\dism 再运行Dism
d. 解压Wim文件
Dism /Mount-Wim /WimFile:[wim文件的位置] /index:[镜像的序号] /MountDir:[解压目录]
例如: Dism /Mount-Wim /WimFile:d:\install\install.wim /index:1 /MountDir:e:\testfolder
e. 用 dism 向脱机windows 加入 Hotfix
"Dism /image:[脱机windows的根目录] /Add-Package /PackagePath:[补丁文件的Path]"
例如: Dism /image:e:\testfolder /Add-Package /PackagePath:d:\hotfix\Windows6.1-KB981542-x64.msu
f. 重新打回wim格式。
Dism /Unmount-Wim /MountDir:d:\test /Commit
2. 向机器上的脱机系统直接打入补丁
这一步需要Windows PE 支持。若以首先要找到相应系统的(64位,或者32位)的Win PE,或者Windows 安装盘。
a. 假设使用Windows 安装盘启动。选择修复Windows,一步步下去,直到说无法修复,给出几个选项。这时候进入命令行。(如果是Win PE启动,就直接进入命令行)
b. 找到 Dism.exe 文件,一般应该在 [脱机系统盘]\windows\system32。
c. 尝试运行 dism,如果出现dismcore.dll 错误,就将dism.exe 复制到 \windows\system32\dism 再运行Dism
d. 用 dism 向脱机windows 加入 Hotfix
"Dism /image:[脱机windows的根目录] /Add-Package /PackagePath:[补丁文件的Path]"
例如: Dism /image:c:\ /Add-Package /PackagePath:d:\hotfix\Windows6.1-KB981542-x64.msu
e. 退出命令行,重启。
Windows 10 更改公用网络,专用网络
Windows 10 更改网络位置的地方又改变了。如果不知道的话,很难找
改变这个设置的地方不是那么容易找到,因为不是改变网络类型,而是改变共享的是否。去设置,网络和inernet,然后点以太网,然后右边点击“以太网已连接”
接着就是下面这个开关啦,设为开就是专用网络,可以使用家庭组,设为关就是公用网络。
Windows 8 缺少计算机所需的介质驱动程序 错误
Windows Network Printer Offline
Windows Phone 7 作为 USB Drive
Windows Phone 7 无法连接Zune
Windows 7 对等网络分组服务无法启动的解决
Windows 7 Path 环境变量
Windows 7 通知区域系统图标的更改
Windows 7 只有部分内存可用的解决
删除Linux后 Windows 7 无法启动的解决
Windows 7 桌面背景无法设置的解决
Windows 7 简易版改桌面软件
变色龙 Chameloen 自动启动小技巧
PSP 神卡驱动
Windows 7 Esata HotPlug
Windows 7, 8, 10 安装盘出现OEM协议
Sony Vaio Clean Install Orders
Windows 无法完成配置
Windows 10 更改公用网络,专用网络